Introduction To Cnc Machining

Learn the basic principles and mendasar mechanics of CNC machining and how these relJasa Machining Jasa Machining Medan ate to its key benefits & limitations.

Written by Alkaios Bournias VarotsisHow does CNC machining work?

There are two main types of CNC machining systems: milling and turning. Each is better suited for manufacturing different geometries, due to its unique characteristics.

Let’s break down how parts are manufactured using these two machine setups…How does CNC milling work?Schematic of a typical CNC milling machine

CNC milling is the most popular CNC machine architecture. In fact, the term CNC milling is often synonymous with the term CNC machining.

In CNC milling, the part is mounted onto the bed and material is removed using rotational cutting tools. Here is an overview of the basic CNC milling process:First, the CAD model is converted into a series of commands that can be interpreted by the CNC machine (G-code). This is usually done on the machine by its operator, using the provided technical drawings.A block of material (called the blank or the workpiece) is then cut to size and it is placed on the built platform, using either a vice or by directly mounting it onto the bed. Precise positioning and alignment is key for manufacturing accurate parts and special metrology tools (touch probes) are often used for this purpose.Next, material is removed from the block using specialized cutting tools that rotate at very high speeds (thousands of RPM). Several passes are often required to create the designed part. First, an approximate geometry is given to the block, by removing material quickly at a lower accuracy. Then one or more finishing passes are used to produce the final part.If the contoh has features that cannot be reached by the cutting tool in a single setup (for example, if it has a slot on it back side), then the part needs to be flipped and the above steps are repeated.A typical CNC milled part, manufactured by removing material from a rectangular blank

After machining, the part needs to be deburred. Deburring is the manual process of removing the small defects left on sharp edges due to material deformation during machining (for example, the defects created as a drill exists the far side of a through hole). Next, if tolerances were specified in the technical drawing, the critical dimensions are inspected. The part is then ready to use or post-process.

Most CNC milling systems have 3 linear degrees of freedom: the X, Y and Z axis. More advanced systems with lima degrees of freedom also allow the rotation of the bed and/or the tool head (A and B axis). 5-axis CNC systems are capable of producing parts with high geometric complexity and may eliminate the need for multiple machine setups.How does CNC turning work?Schematic of a typical CNC turning machine

In CNC turning, the part is mounted on a rotating chuck and material is removed using stationary cutting tools. This way parts with symmetry along their center axis can be manufactured. Turned parts are typically produced faster (and at a lower cost) than milled parts.

Here is a summary of the steps followed to manufacture a part with CNC turning:The G-code is first generated from the CAD model and a cylinder of stock material (blank) with suitable diameter is loaded in the CNC machine.The part starts rotating at high speed and a stationary cutting tool traces its profile, progressively removing material until the designed geometry is created. Holes along the center axis can be also manufactured, using center drills and internal cutting tools.If the part needs to be flipped or moved, then the process is repeated. Otherwise, the part is cut from the stock and it is ready for use or further post-processing.A typical CNC turned part, manufactured by removing material from a cylindrical blank

Typically, CNC turning systems (also known as lathes) are used to create parts with cylindrical profiles. Non-cylindrical parts can be manufactured using modern multi-axis CNC turning centers, which are also equipped with CNC milling tools. These systems combine the high productivity of CNC turning with the capabilities of CNC milling and can manufacture a very large range of geometries with (looser) rotational symmetry, such as camshafts and radial compressor impellers.

Since the lines between milling and turning systems are blurry, the rest of the article focuses mainly on CNC milling, as it is a more common manufacturing process.Machine Parameters

Most machining parameters are determined by the machine operator during the generation of the G-code and are usually of little interest to the designer. The machine parameters of interest are the build size and the accuracy of the CNC machine:

CNC machines have a large build area. CNC milling systems can machine parts with dimensions of up to 2000 x 800 x 100 mm (78’’ x 32’’ x 40’’) and CNC turning systems can manufacture parts with diameter of up to Ø 500 mm (Ø 20’’).

With CNC machining, parts with high accuracy and tight tolerances can be manufactured. If no tolerance is specified, then parts will be machined with a typical accuracy of ± 0.125 mm (.005’’). Tight tolerances down to less than half the diameter of an average human hair (± 0.025 mm or .001’’) can be achieved with CNC.CNC Cutting Tools

To create different geometries, CNC machines use different cutting tools. Here are some of the most commonly used milling tools in CNC:A selection of the most common CNC cutting tools (not in scale)

The flat head, bull head and ball head end mill tools are used to machine slots, grooves, cavities and other Jasa Machining Medan vertical walls. Their different geometry allows the machining of features with different details. Ball head tools are also commonly used in lima-axis CNC machining to manufacture surfaces with curvature and freeform geometries.

Drills are a common and fast way to create holes. You can find tables with the standard drill sizes here. For hole with non-standard diameter, a plunging flat head end mill tool (following a helical path) can used.

The diameter of the shaft of slot cutters is smaller than the diameter of their cutting edge, allowing these milling tools to cut T-slots and other undercuts by removing material from the sides of vertical wall.

Taps are used to manufacture threaded holes. To create a thread, precise control of the rotational and linear speed of the tap is needed. Manual tapping is also still commonly used in some machine shops.

Face milling cutters are used to remove materials from large flat surfaces. They have a larger diameter than end mill tools, so they require fewer passes to machine large areas, reducing the total machining time and producing flat surfaces. A face milling step is often employed early in the machining cycle to prepare the dimensions of the block.

An equally large range of cutting tools are also used in CNC turning, covering all machining needs, such as face cutting, threading and groove cutting.

Here is a video of a face milling cutter in action:Geometric Complexity & Design Restrictions

CNC offers great design freedom, but not every geometry can be CNC machined. Unlike 3D printing, part complexity increases the cost, as more manufacturing steps are required.

5-axis CNC systems allow the cutting tool to access areas that are impossible to reach with 3-axis systems

The main restrictions in CNC have to do with the geometry of the cutting tool. For example, the internal edges of a slot will always be rounded, as they are machined using a tool with a cylindrical profile.

Tool access is another major restriction in CNC: material cannot be removed unless the tool can reach that area. Most CNC machines are tiga-axis systems, so any feature must be designed so that it can be accessed directly from above. lima-axis CNC systems offer greater flexibility, allowing the creation of more intricate parts, as the angle between the part and the tool can be adjusted to gain access to difficult to reach areas.

Parts with thin walls or other fine features are difficult to CNC machine. Thin walls are prone to vibrations and are in danger of breaking due to the cutting forces. The minimum recommended wall thickness is 0.8 mm for metals and 1.5 mm for plastics.

An article with more design guidelines specifically for CNC machining can be found here.Benefits & Limitations of CNC machining

The key advantages and disadvantages of the technology are summarised below:

CNC machining offers excellent accuracy and repeatability, and can produce parts with very tight tolerances, making it ideal for high-end applications

CNC materials have excellent and fully-isotropic physical properties and are suitable for most engineering applications.

Leave a Reply

Your email address will not be published.